High Frequency (IntelliHID)
Intelli-HID 320-600 Watt Electronic Ballast
Intelli-HID's 320 and 600 Watt electronic ballasts deliver more lumen output while consuming less
power. Equipped with a 4-position selector switch Intelli-HID's 320 Watt can be set to operate at 320, 250, 200 or 150 Watts while Intelli-HID's 600 Watt can be set to operate at 600, 575, 400 or 360 Watts. Along with the initial power savings associated with an Intelli-HID replacement the 320/600 ballasts can be dimmed by up to 50%. Intelli-HID's 320/600 Watt electronic ballasts are ideal for a wide range of commercial and industrial applications such as grocery stores or warehouses. Dimming is ideal for applications that involve a prolonged running time of which lighting output requirements may vary by time of day. Whether your organization is looking for LEED® certification within a new building or there is a mandated green initiative faced by your existing building the use of Intelli-HID's 320 Watt or 600 Watt electronic ballasts will prove to be beneficial. Intelli-HID's dimmable high frequency ballasts make it possible to save energy and cut costs without sacrificing light output.
Control (optional)
Take advantage of Intelli-HID's dimming technology to gain even greater energy savings. Intelli-HID’s lighting systems are fully addressable and controllable. You may choose from a wide range of controller options including photocells, wall-box dimming, radio frequency, occupancy sensors and programmable control systems. Each individual project can be tailored differently to use various combinations of one or more of the control systems listed above to most effectively meet the goals of the organization. For any addition information regarding our control systems in general or to see how they can be applied to your organizations specific lighting project we encourage you to contact one of our lighting consultants.
Features
Increased light output (mean lumens at 95% of initial lumens)
Reduced energy costs by greater than 50% over traditional core and coil magnetic ballasts Increased lamp life by more than 30%
Dimming allows for light harvesting and further energy reductions
Specifications
Input Voltage: 120-347V
Input Frequency 50/60Hz
Power Factor: 0.996
Low THD: <5%
Crest Factor: <1.43
RF (optional): 400/900 MHz
Min. Start Temperature -22°F, -30°C
Max. Ambient Temperature: 150°F, 65°C
Max. Case Temperature: 167°F, 75°C
Performance
Short Circuit Operation Protection
High temperature cut off: 70C
Cycle by cycle protection
Re-strike protection
Radio interference suppression
End of lamp life shut-off
Power supply regulation
Regulatory/Certifications
CSA, UL, ULC Listed
FCC Part 18 limits for EMI/RFI
Physical Dimensions
HID320MH: 22" Diameter x 29" Length
HID600MH: 25" Diameter x 29" Length
Warranty
3 Year Limited warranty
